Tuesday, 26 May 2020

Acrylic Manufacturing : Acrylic combined Saw 48 °

Acrylic combined Saw 48 °

The fast and economical solution for all those who want to produce acrylic glass boxes. The bondings are of the highest optical quality!

Universally applicable for

Internal bondings
The swivel range of 48° is ideal for internal bondings with ACRIFIX® 2R 1900. The perfect gap dimension of 1.3 mm width meets the highest demands on the appearance of the bond. With our suitable polishing saw blade you produce ideal cut surfaces for gluing. The roughness of the cut surface is very low. Thus the cut marks are invisible after gluing! This even applies to the use of solar adhesives. The diamond polishing process is superfluous here. This saves you time and money while at the same time providing the best quality.

External bondings
The same applies to external bondings with ACRIFIX® 2R 0190 and ACRIFIX® 1R 0192. In addition to the highest quality of the bonded appearance, you also achieve sharp adhesive edges inside and outside!

V-groove bondings
Even when using our V-groove technique, the remaining bar on the back of the plate remains at the desired 0.3 mm. Because our panel hold-down is supplied ready mounted on your sliding table saw. It ensures that the acrylic glass plate does not flutter during sawing with the V-groove saw blade. The integrated spring pack in the plate hold-down also compensates for thickness tolerances of the material!


Your benefits at a glance:


⌧ Optimum cutting angle 48° of the saw blade.
⌧ Best adhesive surface with low roughness with our polish saw blades (optional).
⌧ Ideal adhesive gap for internal and external bonding.
⌧ Saving the diamond polishing process.
⌧ V-groove bonding for small boxes with our V-groove saw blade (optional).
⌧ Optically superior bondings with ACRIFIX® 2R 1900 and ACRIFIX® 1R 9019 Solar.

edging dimensions
Trimming length 1660 mm
Cutting width with rip fence 900 mm
max. cutting width left of saw blade 1840 mm
Saw blade width up to 13 mm possible.
max. cutting height 90°/48° 100 / 80 mm
Inclination of the saw blade 90° - 4


This article in application video:

Inside gluing acrylic glass

External bonding of acrylic glass

Grooving acrylic glass and making boxes

Request Quote for:

This email address is being protected from spambots. You need JavaScript enabled to view it.


Imprint and Copyright: Serrox Technischer Handel Roland Sättler, Reinheimer Str. 41, D-64372 Ober-Ramstadt. USt-ID: DE214747801.

+49 (0) 6154 575-001 +49 (0) 6154 575-002

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.