Sunday, 29 March 2020

Acrylic Manufacturing : Saw blade V-groove over 90 ° and over 96 °

Saw blade V-groove over 90 ° and over 96 °

With our high-performance saw blades with a point angle of over 90° and over 96°, you can saw V-grooves with dimensionally accurate repeatability in your production. The main areas of application are: box gluing with the folding technique, and short-leg folding. In some cases, where a very sharp edged edge is required (short leg length - no sword or banana effect), the following method must be used: At the point where the acrylic glass pane is to be bent, a V-groove is sawn with the high-performance saw blade 90°, then heated and bent. With this procedure you can also produce straight-line angle bonds for e.g. light boxes by sawing the panels down to 0.3 mm with 90° (coloured boxes) and fixing them on the back of the panels with a special adhesive tape (compatibility with the adhesive, Art. No. 01030012/G25 or 01030012/G50). After fixing with the special adhesive tape, the plate is broken (remove corner areas) and the light box is aligned in a prism and glued with a solvent adhesive. For transparent material it is recommended to work with the high-performance saw blade from a point angle of more than 96°. Due to the adhesive gap, the polymerization adhesive can be applied bubble-free with an adhesive bottle. After curing, the special adhesive tape is removed.


Your benefits at a glance:


⌧ High-performance saw blade suitable for your circular saw
⌧ Point angle 90°, colored plate, or over 96°, colorless plate
⌧ Material thicknesses from 3 mm to 6 mm
⌧ Efficient production of e.g. light boxes or sharp edged edges without sword effect
⌧ Economic production
⌧ Short changeover times


This article in application video:

Grooving acrylic glass and making boxes

Request Quote for:

Artikel no. 19030017-90 Saw blade V-groove > 90° and > 96°


Imprint and Copyright: Serrox Technischer Handel Roland Sättler, Reinheimer Str. 41, D-64372 Ober-Ramstadt. USt-ID: DE214747801.

+49 (0) 6154 575-001 +49 (0) 6154 575-002

This email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.